EarStudio ES100-24bit Portable High-Resolution Bluetooth Receiver/USB DAC/Headphone Amp with LDAC, aptX HD, aptX, AAC (3.5mm unbalanced & 2.5mm balanced output)
Free Shipping Included! EarStudio ES100-24bit Portable High-Resolution Bluetooth Receiver/USB DAC/Headphone Amp with LDAC, aptX HD, aptX, AAC (3.5mm unbalanced & 2.5mm balanced output) by EarStudio at Joom Temp. MPN: ES100. Hurry! Limited time offer. Offer valid only while supplies last. EarStudio supports Qualcomm's aptX HD codec, which allows you to stream 24bit hi-res music wireless. EarStudio automatically enhances 16bit music
EarStudio supports Qualcomm's aptX HD codec, which allows you to stream 24bit hi-res music wireless. EarStudio automatically enhances 16bit music into 24bit sound. We use CSR 8675 Qualcomm Chip and 2x DACs of AK4375a.
Noise free, jitter free.
EarStudio ES100 reproduces sound over Bluetooth through Radsone's patented DCT technology which reduces subtle digital noise and cleans the jitter from Bluetooth streaming.
Dual DACs with analog volume control
EarStudio has optimized circuit architecture, proprietary DualDrive technology, using 2 independent Hi-Fi DACs and Amplifiers. Unlike other dual DAC audio systems, the fully differential audio signal path directly goes to the output jack, with NO switch components in the way, delivering pure signal without any loss or distortion, and with enough power. Moreover, 2 selectable operating modes support 2x current or 2x voltage, as needed by depending on the type of connected headphones. Then, we took a further step for details by adopting an analog volume control. Digital volume adjustment has the downside because it scales down PCM audio sample before the D/A conversion, resulting in harsh sound and the loss in sound detail, SNR, as well as THD. EarStudio offers analog volume control to keep the optimal audio performance even at low volume level using Programmable Gain Amplifier (PGA) which is the best way to control the volume.
Full Balanced and single ended output
EarStudio offers two outputs: A single-ended/double current 3.5mm jack and full-balanced/double voltage 2.5mm Jack.
Note: For headphones with the high impedance over 200~600-ohm, ES100 may not be able to deliver enough sound pressure level, especially with 3.5mm unbalanced output. Please note the maximum output power level of ES100 for your high impedance head units.
Features & Highlights
- 24bit Bluetooth receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
- Dimension 1 x 2 x 0.5 inch / Weight 20g / 14 hours of continuous playback / Dedicated app featured with 10 band EQ and Ambient mode / USB audio playback / device firmware update
- Including 2 independent Hi-fi DACs and Amplifiers (Asahi Kasei AK4375a) - the optimal Dual DACs/AMP design for both single-ended and full-differential outputs
- Analog volume control allows to keep the optimal audio performance even at low volume level using Programmable Gain Amplifier (PGA) which is known for the best way to control the volume/ Built-in microphone supports answering calls while using earphones without a microphone
- Max. Output Power (No load): 1.1Vrms (3.2V peak-to-peak) at 3.5mm unbalanced output/ 2.2Vrms (6.4V peak-to-peak) at 2.5mm balanced output [Output Impedance: Approximately 1-ohm]
|Item Weight:||0.04 pounds|
|Item Size:||2 x 0.5 x 0.5 inches|
|Package Weight:||0.1 pounds|
|Package Size:||2 x 1.9 x 1.9 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by EarStudio, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: TAC17-VWSNC-EPROJFOAM-CUSTOM, ean: 0606034870673,
CASEMATIX Protective Projector Carrying Case With Foam Compartment Designed For Viewsonic PA503S / PA503W / PA503X / PG703W / PG703 Projectors and Accessories This hard shell case's exterior is made of a dense, injection composite plastic for superi...
The DISDIM aux cord for iPhone 8 with spring bring a new experience for you. It can stretch length to about 1.4 meter(5ft), it is easy to tidy up and save space. 24K gold plated plug and oxygen-free copper wire core which ensure to the high fidelity ...
mpn: NewFantasia, ean: 0702373612193,
Replacement Audio upgrade Cable For Audio Technica ATH-M50x / ATH-M40x / ATH-M70x headphones extension cordsReplacement Audio upgrade Cable For Audio Technica ATH-M50x / ATH-M40x / ATH-M70x headphones extension cords. Length: 1.2meters(4ft), 1 years ...
By Accessory House
mpn: QC2/15 Combo Pack, ean: 3475308011510,
Have you owned your QC2/15 headphones for a longtime? If so then you are probably noticing some black dandruff and overall loss of comfort and performance. Give your QC2/15 headphones a new lease on life with this Accessory House replacement ear pad ...
mpn: AC-BQ25BK, ean: 0600978050283,
Bingle Audio Cable with Upgraded Inline Mic/Remote Control and Durable 1.5m Cable, Compatible with all Apple Device a Special Designed Replacement Cord for Bose QC25 QuietComfort 25 Headphones(OEM product, Not original) - Black Perfect replacement...
mpn: FBA_1/4" Adapter (549346), ean: 0615104234772,
Authentic Genuine Universal 6.35mm Adapter Jack - 3.5mm (1/8 Inch) to (1/4 Inch)Universal Headphone Adapter. Adapter Size: 1/4". Gold Plated Connection. ...
mpn: 602011-WH, ean: 4718487118748,
Apple MFi Certified Lightning Adapter Use original C101 headset aux jack module to support wide compatibility and excellent sound quality. Wide Compatibility Lets you connect devices that use a 3.5 mm audio plug to your lightning devices. Works wi...
mpn: 40394, ean: 0887479084188,
Replace lost or damaged QC3 ear cushions with a new pair designed for easy installation. Cushions align with mounting posts inside the headphone ear cups, then snap easily into place. Compatible products QuietComfort 3 Acoustic Noise Cancelling headp...
mpn: HY-HA26, ean: 0700736187289,
Damex is the only listing owner, only from "Damex" can get warranty:180days Easy installation 1.Pull off your old ear pads cushions. 2.Apply the new ear pads to align with mounting posts inside the headphone earcups 3.then snap easily into place,fin...
mpn: BWAVZ-HOOKA, ean: 4895204900012,
Hooka by Brainwavz, a compact multi purpose design made from die cast aluminum is designed to fit and hang most headphones of any weight. The Hooka maintains its shape and form whilst holding the heaviest of headphones on the market. The specially de...